Specification

1. This punching machine is used for the punching of the side plate of the building aluminum formwork with a cross-sectional width of 80-600mm, as well as the side plate of the C-slot above 100*100 and the punching of the keel.

2. This machine can meet the rib height of 63.5mm and 65mm at the same time, with strong versatility and easy interchangeability. 3. The body of the whole machine adopts heat treatment to eliminate internal stress and has sufficient strength and rigidity. The hydraulic station of the machine adopts the domestic first-class brand, the electrical components are all Schneider brand, the performance is stable, the hydraulic upper drive of the machine, and the four-link mechanism ensures that the slider and the punching needle are synchronously downstroked.

5. The punching diameter is 16.5 mm, the hole spacing is 50 mm, and there are 30 holes. The two ends are equipped with end positioning devices.

6. It has a stroke adjustment bolt to adjust the effective working stroke, which is simple and convenient. The travel switch is also equipped with stroke adjustment.

7. The punching pin is corrected by a stripper to ensure that the punching pin is in the center of the mold core, the punching hole is free of burrs, and the service life of the punching needle is extended (no need to replace the punching pin for 3 months)

8. The hydraulic system of the fuselage adopts an integrated design to save space.

9. The hydraulic system adopts the latest 40 valve group to improve production efficiency, and the completion time of punching is 4S.

10. The punching pin is free of disassembly, and the punching pin is not disassembled to change the hole spacing, so as to improve production efficiency.

Technical Parameter